1300 Land Rover Heavy Duty UJs for Standard Prop, 74.6 x 27mm, GKN, Pair, GL1168K48

£54.84 inc. VAT

6 in stock

SKU: GL1168K48 Category:


2 x Heavy Duty 1300 Genuine GKN Heavy Duty 74.6mm x 27mm UJs for Standard Propshafts including 2 tubes of K48 Grease.

Part No :- GL1168K48, Pair 1300 Heavy Duty STANDARD Universal Joints including 2 tubes of Grease.

Weight :- 2.2KG

Fits:- Standard Defender & Discovery 1 propshafts (Not Wide Angle Propshafts).

The Kit includes :-
2 x Heavy Duty 1300 GKN Greased Universal Joints 74.6mm x 27mm.  

These joints are a Heavy Duty replacement joint for standard original fitment propshafts. There are lots of cheaper ones on the market these days that look the same as these, these ones are GENUINE HEAVY DUTY GKN, see the pictures that explains, GKN Hardy Spicer also produce cheaper joints that look the same as these but these are the Heavy Duty Better Quality ones.

These joints will fit :-
Defender 200tdi, 300tdi 90/110/130, Front & Rear, (Very early 90/110/130 use a Larger 1310 Joint 81.8mm x 27mm).
Defender Td5 90/110/130 Rear Propshaft only, (Defender Td5 Front use a Larger 1330 Joint 92mm x 27mm).
Defender Puma 2.4, 2.2 110/130 Rear only, (Puma 90 Front & Rear, 110/130 Front use Larger 1350 Joints 92.1mm x 30.2mm).

These are a very high quality GKN replacement UJ for all 1300 standard propshafts, the joint measures 74.6mm x 27mm, inside the caps as you can see in the picture, there is a plastic THRUST WASHER, these allow the grease to get to the 4 caps, (please be careful when fitting these as you only want 1 thrust washer in each cap), the caps are also sealed with METAL and RUBBER SEALS to help stop mud and water getting into them.

One way to identify cheaper joints is to look at the seals on the caps, if they’re rubber only and body of the joint uses smaller 16mm Trunnions they are not as good as these ones, these Heavy Duty ones have a 18mm Trunnion with Larger Longer Needle Rollers with Deeper Caps, see the pictures.

2 x Tubes of MORRIS K48EP MOLY EP GREASE is also supplied, this is a very high quality grease that can be used for many things, including propshafts, wheel bearings and the CV Joints in the front axle.

On lifted vehicles the propshaft is always under more strain due to the angles they run at and greasing the joints is very important, especially after being in water and mud.

Please note :- These Universal Joints don’t fit 1310 wide angle props.

Additional information

Weight 2.2 kg