4 x Polyurethane Track Rod End Boots + 4 Ball Joint Boot Clips 33mm
Part Number:- GL1266, 4 Polyurethane Track Rod End Boots + 4 Clips
Manufacturer:- POLYBOOTS & Gwyn Lewis 4×4
- Land Rover Defender, Land Rover Series 3, Discovery1, Discovery 2, RRc and P38.
- Defender Drop Arm Ball Joint.
- Our HD Greaseable Track Rod Ends.
- Original Lemforder Track Rod Ends.
- Delphi Track Rod Ends.
- Defender Anti Roll Bar Link Arms.
This is a Kit of 4 replacement Track Rod End Boots made from Polyurethane and 4 Ball Joint Boot Clips made from Stainless Steel
A common problem with Rubber Track Rod End Boots these days is perishing/cracking, Rubber doesn’t seem to be what it used to be. Polyurethane will not perish/crack like normal Rubber which will give a much longer service life. These boots are Double Convoluted which allows them to move/flex more without stretching.
We would recommend that you do not fit the smaller clip that your original Rubber Boot may be fitted with, leaving this clip off will allow old grease to squeeze out as new grease is pumped in, it will also stop the Boot from swelling and popping off from over greasing. The Boot needs to swivel over the track rod end shaft as your steering is turned lock to lock, so even if your track rod end is not a greasable type this will help stop the boot from twisting as the shaft turns with your steering.When using these Polyurethane Boots to replace the Rubber boot on a standard Defender Press In Ball Joint you can refit the smaller clip, fit this to the boot before you fit it over the Ball Joint.
If bought on their own we will send them via Evri 5 to 7 days for delivery, if bought with other items depending on the weight they may go via our normal carrier DHL, delivery costs are calculated at the checkout.