1 x Polyurethane A-Frame Ball Joint Boot + Clip 47mm.
Part Number:- GL1267, Polyurethane A-Frame Ball Joint Boot + Clip
Manufacturer:- POLYBOOTS & Gwyn Lewis 4×4
Fits:- All A-frame Ball Joints as fitted to Defender, Discovery 1 and Range Rover Classic.
This is a kit of 1 x replacement A-Frame Ball Joint Boot made from Polyurethane and 1 Clip made from Stainless Steel.
A common problem with Rubber Ball Joint Boots these days is perishing/cracking, rubber doesn’t seem to be what it used to be. Polyurethane will not perish/crack like normal Rubber which will give a much longer service life. These boots are Double Convoluted which allows them to move/flex more without stretching.
We would recommend that you do not fit the smaller clip that your original Rubber Boot may be fitted with, leaving this clip off will allow old grease to squeeze out as new grease is pumped in, it will also stop the Boot from swelling and popping off from over greasing.
If bought on its own we will send it via Evri 5 to 7 days for delivery, if bought with other items then depending on the weight it may go via our normal carrier DHL, delivery costs are calculated at the checkout.