A-Frame Ball Joint, Lemforder, Greaseable in Housing, GL1041

£96.00 inc. VAT

5 in stock

Description

1 x LEMFORDER A-Frame Joint, Greaseable in Housing.

Part Number:- GL1041, A-Frame Ball Joint, Lemforder, Greaseable in Housing

Weight:- 3Kg

Fits:- Defender 90/110/130, Discovery 1, RRc

Please note that this listing may not fit some Military Land Rovers as they use M16 bolts to fix the A Frame Housing to the A Frame Arms, if you are unsure the M16 bolt uses a 24mm spanner to fit the bolts

If yours is a Military vehicle and requires one of these please see this listing here –  GL1274

This is a LEMFORDER A-Frame Ball Joint, but not just the standard Lemforder joint, this one is GREASEABLE it comes fitted with our GL1174 POLY BOOT and is ready pressed into the housing to make it much easier to fit to your Land Rover.

The LEMFORDER Joints are what was originally fitted to the A-Frame, we would recommend these for road cars and mild off road cars.

A-frame joints can be very difficult to get out of the old housing and just as difficult to press the new one in, this is why we have done this ready assembled in the housing.

We are now replacing the Standard Rubber Boots on our A-Frame Ball Joints with our UPGRADED polyurethane Polyboots, GL1174 and GL1265 Stainless Steel Clip, we are doing this during assembly here as they are not as easy to change once fitted on a vehicle. A common problem with Rubber Boots these days is perishing/cracking, Rubber doesn’t seem to be what it used to be. Polyurethane will not perish/crack like normal Rubber which will give a much longer service life. During assembly we also pre grease the joints here, please note the small clip on the boot is not fitted, this is because the joint is greaseable.

If new bolts are required to fit the A-frame ball joint, please see here – GL1218

Additional information

Weight 3 kg

You may also like…