Adventurer Old Man Emu Front Standard Length Pin/Pin Shock – Single, GL2000

£115.80 inc. VAT

8 in stock


1 x OLD MAN EMU Nitrocharger Sport Standard Length Front Pin/Pin Shock

Part Number:- GL2000, Old Man Emu Standard Length Front Pin/Pin Shock – Single

Manufacturer:- Old Man Emu

Weight:- 3.3kg

Fits:- Defender 90, 110, 130 / Discovery 1 / RRC

Shock Length open:- 554mm
Shock Length closed:- 329mm
Main Body Diameter:- 55mm
Plastic Shroud Diameter:- 66mm

These OME Shock Absorbers fit Standard Height Front Turrets.

Standard Length Shocks – These can be fitted…
• To a vehicle with or without Anti Roll Bars
• 1” Lowered Ride Height
• Standard Ride Height up to 2” Lift

You will not need extended Brake Hoses or Spring Re-Locators.
Extended Bump Stops will be needed if using a lift spring.

They come ready assembled with the bushes and our bush isolation washers on each end,(these bush isolation washers are very important, to help stop the pin of the shock wearing away, all our shocks come with them ready fitted) see the bush isolation washers here – GL1076

The OME Sport Shocks are designed to provide a superior ride and handling experience compared to other shock absorbers. This is thanks to the multi-stacked rebound and compression valving, once the shock is compressed it is hard to pull back out. This feature helps to prevent body roll and bounce, while still maintaining a comfortable ride both on and off the road.

If your Defender 90 is very light on the rear and you do not carry any extra weight but you would like more comfort, you could use these GL2000 Pin/Pin front shock absorbers on the rear as these are a much softer valved, you will need our GL1171 Pin/Pin shock mounts to fit them.

Additional information

Weight 3.3 kg

You may also like…