Adventurer Old Man Emu Rear Standard Length Pin/Pin Shock – Single

£132.60 inc. VAT


1 x OLD MAN EMU Nitrocharger Sport Standard Length Rear Pin/Pin Shock

Part Number:- GL2005, MEDIUM Adventurer Old Man Emu Rear Standard Length Pin/Pin Shock – Single

Part Number:- GL2006, FIRM Adventurer Old Man Emu Rear Standard Length Pin/Pin Shock – Single

GL2005, these shocks are a Medium Sport Ride, recommended for Defender 90s Rear (light to medium weight Land Rovers)
GL2006, These are the same shock but with a firmer valving, better suited for use on the Rear of 110/130s and 90s that are heavily loaded. (Land Rovers that are regularly carrying extra weight or towing)

Manufacturer:- Old Man Emu

Weight:- 3.2KG

Fits:- Defender 90, 110, 130 with our rear Adventurer / Explorer Pin/Pin Shock Mounts GL1171

These OME shock absorbers are for our Adventurer Suspension Kit, which is a Pin/Pin fitting and will require our Adventurer / Explorer Pin/Pin Rear Shock Mounts GL1171 to fit them to the rear of your Defender.

If your Defender 90 is very light on the rear and you do not carry any extra weight and you would like more comfort, you could use GL2000 Pin/Pin front shock absorbers on the rear as these are much softer valved, you will need our GL1171 Pin/Pin shock mounts to fit them.

It is a known problem for the upper Eye fitting on standard fitment rear shocks to break off due to lack of sideways movement. A Pin fixing allows more movement in all directions without breaking off as has been well proven over the years by my +5inch Challenge Pin/Pin Rear Shock mount. A Pin/Pin Rear Shock provides much improved reliability over the Standard Eye/Pin fitting.

Standard Length Shocks – These can be fitted…
• To a vehicle with or without Anti Roll Bars.
• 1” Lowered Ride Height
• Standard Ride Height up to 2” Lift

You will not need extended Brake Hoses or Spring Re-Locators.
Extended Bump Stops will be needed if using a lift spring.

They come ready assembled with the bushes and our bush isolation washers on each end,(these bush isolation washers are very important, to help stop the pin of the shock wearing away, all our shocks come with them ready fitted) see the bush isolation washers here – GL1076

The OME Sport Shocks are designed to provide a superior ride and handling experience compared to other shock absorbers. This is thanks to the multi-stacked rebound and compression valving, once the shock is compressed it is hard to pull back out. This feature helps to prevent body roll and bounce, while still maintaining a comfortable ride both on and off the road

Please click HERE to download our Shock Bush Isolation Washers fitting instructions.

Additional information

Weight 3.2 kg

GL2005 MED, GL2006 FIRM

You may also like…