Defender Drop Arm Conversion, Discovery 1 Straight Drop Arm, NTC9236

£60.00 inc. VAT

7 in stock

SKU: NTC9236 Category:


1 x Discovery 1 / Range Rover Classic Straight Drop Arm, Right Hand Drive fitment.

Part Number:- NTC9236, Discovery 1 Straight Drop Arm

Weight:- 1.9KG

Fits:- Defender 90/110/130, 4 bolt Power Steering box, RHD.
(Also fits early 3 Bolt Power Steering Box, Will NOT FIT 6 Bolt Power Steering box or Manual Steering Box)

These are the Straight Drop Arms we use as part of our Defender Drop Arm Conversion Kits

These are Right Hand Drive Fitment NTC9236, Left Hand Drive Fitment, NTC9235, also available, please contact us for these.

See the last picture showing how to align the drop arm once fitted, the drop arm should point slightly towards the driver’s side when driven in a straight line. Make sure to tighten and re-check the nut securing the drop arm to the steering box. This should be done a couple of times after use due to the splined taper on the steering box.

The Torque Setting for the Drop Arm securing nut is 176 NM, it is VERY IMPORTANT that the tightness of this nut is rechecked after use.
Once you are satisfied the Drop Arm has fully worked up the tapered spline of the steering box and the nut remains tight you can then knock over the edges of the lock washer.

Our drop arm will come with a new nut and lock tab washer. The nut size is 1.516″AF Imperial 

If you would like a socket for the drop arm nut, new or old. Please see here – GL1261

Please Click HERE to download PDF fitting advice.

Additional information

Weight 1.9 kg

You may also like…