1 x Pair Front Suspension Turret Securing Rings Extra Heavy Duty 6 mm, DIY.
Part Number :- GL1185, Pair Front Heavy Duty Turret Securing Rings – DIY
Fits:- Defender 90/110/130, Disco 1 & RRC.
Manufacturer :- Gwyn Lewis 4×4, these are made in the UK not cheaper imports.
Torque setting of each nut :- 17.7 lb ft / 24 Nm
These DIY HD Turret Rings require the studs welding to the rings.
These turret securing rings are made out of 6mm mild steel and are zinc plated, they have 8.8 grade studs threaded and welded into them, they also come with nulock nuts and washers, they are a must have when you are changing your front suspension, as standard securing ring bolts do sometimes break off if over tightened.
They have a flat face on the underside for the coil spring to sit on properly and they also have a flat face on the outer edge to stop the tyre rubbing them on full articulation.
Our turret base plate and turret securing rings have flat faces cut in them, this is to minimise any tyre rubbing on full articulation and makes it easier to fit the turret under the inner wing, you can see this on one of the pictures.
When fitting brush plenty of grease over the whole ring and studs to help reduce corrosion.
Sold as a pair and come complete with nylock nuts and washers to fit them.
Please see HERE for a customers YouTube Video Review of our HD Front Turrets and HD Front Turret Securing Rings.