4 Polyurethane Track Rod End Boots – Four, GL1173

£14.40 inc. VAT

Description

4 x Polyurethane Track Rod End Boots

Part Number:- GL1173, Polyurethane Track Rod End Boots – Four

Manufacturer:- POLYBOOTS

Weight:- 0.08KG

Fits:- Our HD Greasable Track Rod Ends, Original Lemforder Track Rod Ends (for Defender, Disco1, RRC, Disco2 and P38), Anti Roll link Arms and Defender Drop Arm Ball Joints.

These are replacement Track Rod End Boots made from Polyurethane. We can also supply a ball joint boot clip to hold the boot onto the ball joint, please see here – GL1045. 

A common problem with Rubber Track Rod End Boots these days is perishing/cracking, Rubber doesn’t seem to be what it used to be.
Polyurethane will not perish/crack like normal Rubber, giving a much longer service life.

These boots are Double Convoluted which allows them to move/flex more without stretching.

We also have these to Fit A-Frame Ball Joints, please click HERE to see them

Fitting, see gallery pictures, you can remove and refit the coil clips by either using a small screwdriver to carefully wind the clip around the boot or using a zip tie to wind the coil clips around the boot.

Screwdriver:-
You need to carefully pick up one end of the larger coil clip using a small flathead screwdriver and then wind the clip around the original Rubber Boot to lift it out of its recess, your original coil clip can then be used to fit your new Poly Boot.
Fitment is the reverse, start by sitting one end of the coil clip into the recess and then wind it around the Poly Boot until the coil clip fits back into its recess.
Take care not to puncture the boot with the screwdriver.

Zip Tie:-
You need to carefully pick up one end of the larger coil clip using a small flathead screwdriver and then slip a small zip tie over the end of the clip, pull the zip tie to lift the clip out of its recess and wind it around and over the boot, your original coil clip can then be used to fit your new Poly Boot.
Fitment is the reverse, start by slipping the zip tie into the coil clip, sit one end of the coil clip into the recess and then pull the zip tie the opposite way to removal while winding around the boot until the clip sits back into its recess. (Pull the zip tie towards the Track Rod End body)

We would recommend that you do not fit the smaller clip that your original Rubber Boot may be fitted with, leaving this clip off will allow old grease to squeeze out as new grease is pumped in, it will also stop the Boot swelling and popping off from over greasing.
Also the Boot needs to swivel over the track rod end shaft as your steering is turned lock to lock, so even if your track rod end is not a greasable type this will help stop the boot from twisting as the shaft turns with your steering.
When using these Poly Boots to replace the Rubber boot on a standard Defender Press In Ball Joint you can refit the smaller clip, fit this to the boot before you fit it over the Ball Joint.

If Evri is your chosen shipping method, please be aware it may take 2 to 7 days for delivery. Shipping options can be changed in the cart.

Additional information

Weight 0.1 kg

You may also like…