GL1239, Pro Comp +2 Inch Front Shocks – Pair

£132.00 inc. VAT

Out of stock

SKU: GL1239 Category:


1 x GL1239, Pair Pro Comp ES9000 FRONT + 2 inch Shocks Pin/Pin.

Fits :- FRONT Defender 90,110,130 / Discovery 1 / RRC.

Weight :- 6KG

The Kit includes :-
2 x Pro Comp + 2 inch Front shocks.
2 x Rubber Boots.
4 x Shock Bush Isolation Washers.
4 x
Nylon Insert T Nuts.

Manufacturer :- Pro Comp/ Gwyn Lewis 4×4

These Pro Comp ES9000 shock absorbers come ready assembled with the bushes and our bush isolation washers on each end,(these bush isolation washers are very important to help stop the pin of the shock wearing away, all our shocks come with them ready fitted), we also fit Nylon Insert T Nuts with these shock because as standard nuts come loose, when you fit these DO NOT over tighten the nuts as there is to much thread on the pins see picture 2, if over tightened it can cause the pin to brake off as the bush cant flex, you can see the bush isolation washers in the Shocks & Springs section of my shop.

2 x Shock Boots are also supplied with these FOC, when you fit the boots, I recommend you don’t clip them on the bottom, as they may hold water and moisture that can cause the chrome rod to rust, you can always cut the boot to length so its just touching the lower shock body, you can also brush some grease on the chrome rod to help stop any rust forming.

Please click HERE for the Shock Bush Isolation Washer fitting instructions

Additional information

Weight 6 kg