Rear Trailing Arms Defender, Disco1, RRC STANDARD Heavy Duty

£83.76£108.00 inc. VAT

Description

1 x Pair Rear STANDARD HEAVY DUTY Trailing Arms

Please select from the Drop Down Menu between Arms, Arms with Full Bolt Kit or Arms with Full Bush and Bolt Kit.

Part Number:- GL1198, Rear Trailing Arms Defender, Disco1, RRC STANDARD Heavy Duty

Part Number:- GL1197, Rear Trailing Arms Defender, Disco1, RRC STANDARD Heavy Duty inc Full Bolt Kit

Part Number:- GL1196, Rear Trailing Arms Defender, Disco1, RRC STANDARD Heavy Duty inc Full Bolt Kit and Chassis Bushes

Fits:- Defender 90/110/130, Discovery 1, RRC, Standard Suspension NO Lift and with Standard Length Shocks

Manufacturer:- Various

Weight:- 6.5KG, 7.5KG, 9.5KG

These are STANDARD REPLACEMENT arms STRAIGHT (No Crank), They are a HEAVY DUTY STANDARD ARMS using 28mm x 5mm wall tube, original ones are 28mm x 3.5mm, some standard arms are getting quite old now and they do tend to break off on the friction weld on the chassis end.

They all come complete with the bushes in the axle ends ready pressed in.

If your suspension is standard height but you have longer travel shocks fitted then we would recommend you fit our Heavy Duty CRANKED rear arms, this helps with flex off road as it takes the pressure off the chassis bushes as your wheels drop down.

On older RRc you will require a chassis bush as the older ones had imperial threads and the bush has a smaller hole, if you are unsure, on the older ones a 24mm spanner fits the nut on the chassis end, ours are metric m20 and a 30mm spanner fits the nut on the chassis end, most of the ones are metric.

If you would like a Heavier Duty Rear Trailing Arm please click HERE for our Full Heavy Duty Twin Wall Straight Rear Arms.

 

Additional information

Weight N/A
Bush and Bolt Kit Options

Arms GL1198, Arms inc Full Bolt Kit GL1197, Arms inc Full Bush and Bolt Kit GL1196

You may also like…