Shock Bush Isolation Washers, Four Shock Kit, GL1076-8

£24.00 inc. VAT

5 in stock


8 x Shock Absorber Bush Isolation Washers for Pin/Pin shocks.

Part Number:- GL1076-8, Eight Shock Bush Isolation Washers, Four Shock Kit

Weight:- 0.23KG

Fits:- All long travel shock absorbers Pin/Pin fixing Front or Rear (+5 inch shocks).

Manufacturer:- Gwyn Lewis 4×4

This kit of 8 washers will do 4 shock absorbers.

These are very important for all +5 inch LONG TRAVEL SHOCK ABSORBERS, the washers are used to centralize the shock in the shock mount, they help stop the pin of the shock absorber wearing the hole in the upper and lower mounts by holding the pin of the shock in the centre of the hole. 2 per shock absorber are required. They are fitted as shown in the picture and the reverse on the bottom mount. On later rear axles, the original cup washers are spot welded in by 4 spot welds, these must be removed as they restrict articulation and will cause the pin of the shock to break off, once they are removed you can then fit these new ones as they will allow more movement for the shock bush to flex.

All shock absorbers we supply come with these washers already fitted, (shock absorbers bought elsewhere probably don’t have these fitted).

They cup a bush with an O/D of 38mm, which will fit in a hole 20mm in diameter and the hole in them is 16mm.

Please click HERE to download the fitting instructions.

If Evri is your chosen shipping method, please be aware it may take 2 to 7 days for delivery. Shipping options can be changed in the cart.

Additional information

Weight 0.5 kg

You may also like…